Jigsaw Blades, Tooth Pitch 2.5, KEN2401020K
Jigsaw Blades, Tooth Pitch 2.5, KEN2401020K Jigsaw Blades Kennedy Johor Bahru (JB), Malaysia, Desa Cemerlang Supplier, Suppliers, Supply, Supplies | Brilliance Trading Sdn Bhd
Quantity
JIGSAW BLADES (EQV. TO BOSCH T101B) PKT-5

Kennedy® "T" Type Shank Jigsaw Blades

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

HCS - Medium Duty (Pack 5)

Capacities (mm): Wood: 50.0. Plastics: 30.0. Tooth Pitch: 2.5. Effective Length: 75. Tapered & ground. Equivalent to Bosch T101B.
Specification:
Property Value
Overall Weight 0.038
UNSPSC Code 27112802
eCl@ss Code 21011603
Brand Kennedy Industrial
Supplier Part No. 32225/5
Tooth Pitch 2.5
Capacity (mm) Plastics 30.0
Effective Length 75
Equiv. T101B
Tapered and ground y
Cuts on down stroke -
For cutting curves -
Side set teeth -
Wavy set tooth form -
Capacity (mm) Wood 50.0

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version