Screw Drills, Solid Carbide, KEN1541060K
Quantity
SD6 6mm SOLID CARBIDE SCREW DRILL
Kennedy® Screw Drills Solid Carbide
Primarily designed for removing broken taps or bolts without damaging the component surface. By drilling the core of a tap it is possible to remove the remaining pieces with a scriber. Screw Drills are also suitable for drilling other hard materials including: hardened steels, glass, stellite etc. Select screw drill as per tap diameter. Steady manual feed component and spindle stability are vital. Drills should be running between 1500 and 3500 revs/min. A steady and continuous manual feed should be applied. No cutting fluid required.
For all technical specifications please refer to our catalogue.
Screw Drill Solid Carbide - Metric
Primarily designed for removing broken taps or bolts without damaging the component surface. By drilling the core of a tap it is possible to remove the remaining pieces with a scriber. Screw Drills are also suitable for drilling other hard materials including: hardened steels, glass, stellite etc. Select screw drill as per tap diameter. Steady manual feed component and spindle stability are vital. Drills should be running between 1500 and 3500 revs/min. A steady and continuous manual feed should be applied. No cutting fluid required.
For all technical specifications please refer to our catalogue.
Screw Drill Solid Carbide - Metric
Specification:
Property | Value |
---|---|
UNSPSC Code | 23241605 |
eCl@ss Code | 21010101 |
Brand | Kennedy Industrial |
Dimensions | 6mm for M10 - M12* |
Type | SD6 |
Weight each | 30g |